Astralpool VICTORIA PLUS SILENT VS Manual De Instrucciones página 19

2.3.7 SAVINGS SETTING. SETTING POWER SAVINGS
1. Enter the SAVINGS SETTING option in the Settings Menu to adjust the settings for calculating power
savings. The digit of the value of the first setting, h/DAY SINGLE SPEED, will flash.
The power savings reading displayed under the SAVINGS DISPLAY in the Settings Menu (see Section
2.3.6) is calculated based on the following settings:
•
h/DAY SINGLE SPEED: The pump's daily operating time in hours.
•
€/kWh—$/kWh: Cost of a kWh, in euros or dollars depending on the option selected under SAVINGS
DISPLAY in the Settings Menu (see Section 2.1.6).
2. To configure the pump's daily operating time in hours (h/DAY SINGLE SPEED) from the SAVINGS
SETTING option, press the Left and Right Arrow Buttons (
digit selected will flash – and press the Left and Right Arrow Buttons (
digit selected. Once the value of the setting has been set, press button
Once the first "h/DAY SINGLE SPEED" setting has been confirmed, it will go on to the second setting,
i.e., €/kWh—$/kWh. Configure the cost of a kWh (€/kWh—$/kWh) by pressing the Left and Right
Arrow Buttons ( ) to move from one digit to another and the Left and Right Arrow Buttons (
10
increase or decrease the digit selected. Once the value of the setting has been set, press button
to confirm. Once confirmed, it will go back to the options under the Settings Menu.
CLOCK DAY UNITS SETPOINT SET SAVING VIEW TIMER EXPERT
SETTINGS
Go back without making changes
Go back to the Settings Menu
HMI VICTORIA PLUS SILENT VS CONTROL PANEL -
SETTINGS
INSTRUCTION MANUAL
) to move from one digit to another – the
10
) to increase or decrease the
10
(Enter) to confirm.
5
SET SAVING
h/DAY SINGLE SPEED
Confirm
See next page
) to
10
(Enter)
5
Scroll digits
Increase or decrease
value of digit
19