• Backlight compensation selector [BLC]
ON: Compensates the background auto-
matically if it is brighter than the
object.
OFF: This mode is used when the front
of the object is extremely bright.
Default setting: OFF
Note:
Under some conditions, such as
extremely
desired compensation effect may
not be achieved even if the mode is
set to ON to detect the backlight
level.
r Lens unit
Rotate to adjust focus.
t Azimuth adjuster
Adjusts the azimuth angle of the cam-
era.
y Tilting table
Adjusts the tilting position of the camera.
u Panning table
Adjusts the panning position of the cam-
era.
i-1 Panning table lock screw [LOCK]
Fixes the panning table.
i-2 Panning table lock screw hole [LOCK]
(backup)
o Power cable
Supplies 12 V DC from an external power
source.
!0 Cable access hole
!1 Fingerplate
!2 Dust Guard Cap
A rubber cap which prevent dust go into
the camera through the cable access
hole.
10
strong
backlight,
the