w Rotate the tilting table to adjust the tilting
position of the camera (Range: ±75 °).
• This lens can also be rotated in the
reverse direction, but the image azimuth
is reversed. In such a case, turn the pan-
ning table to the 180 ° side to correct the
azimuth image.
• When used at an angle that is close to
horizontal, it must be noted that the
shadow of the dome cover may be pro-
jected.
e Rotate the azimuth adjuster to adjust the
azimuth angle of the image (Range:
±145°).
14
3.Focus adjustment
Move the Lense unit between FAR and
NEAR to obtain the optimum focus.
Note:
Do not touch the surface of the glass
of the lens unit when adjusting focus.