Connecting The Power Cord; Connecting The Interface Cable (For Automatic Mode) - Sirona inLab MC X5 Instrucciones De Uso

Sirona Dental Systems GmbH
Operating Instructions Suction devices for inLab MC X5 and
64 98 609 D3608
D3608.201.02.02.02 11.2015
4.4.2

Connecting the power cord

NOTICE
Grounded power outlet
The unit must be connected to a grounded power outlet.
1. Insert the power cable into the relevant socket on the suction system.
2. Plug the other end into an appropriate power socket with a protective
ground terminal.
Note on the power cable:
The suction system must only be operated with a power cable with a plug
system designed for the relevant country.
Check the voltage specification on the rating plate. The system must
conform to the country-specific supply voltage.
4.4.3

Connecting the interface cable (for automatic mode)

1. Plug the 9-pole connector into the socket of the suction device.
2. Plug the 15-pole connector into the socket of the processing
machine.
4 Transportation and installation
17