Changing Channels - Samsung HL-TS087S Manual De Usuario

the Clock Automatioall_
9 Press the 4 or _ button to select Off or On, then the ENTER button.
The message Select the time zone in which you live. is displayed.
10 Press the A or T button to highlight the time zone for your local area (and to move the
highlight to the appropriate time zone on the map of the United States).
Press the ENTER button.
If clock is not automatically set, see pages 43~44 to set the clock.
11 The message Enjoy your watching, is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message wilt automatically disappear
after several seconds.
If you want to reset this feature...
1 Press the MENU button.
Press the 4 or _,-button to select Setup, then press the ENTER button.
2 Press the A or T button to select Plug & Play, then press the ENTER button.
For further details on setting up options, refer to the page 17.
The Plug & Play feature is only available in the TV mode.
Changing Channels
Usina the Channel Buttons
Press the CH A or CH V button to change channels.
When you press the CH/',, or CH V button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have memorized at
least three channels). You will not see channels that were either erased or not memorized.
See page 21 to memorize channels.
Us_ the Number Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2," then "7."
The TV wilt change channels when you press the second number.
Us_ the "=" Button
The "-" button is used to select stations that broadcast a digital signal.
For example, for Channel 7-1, press "7", then "-", and then "1".
HD indicates the TV is receiving a Digital High Definition signal.
SD indicates the TV is receiving a Standard Definition signal.
For quick channel change, press the number buttons, then press the ENTER button.
the PRE-CH Button to select the Previous Channel
Press the PRE-CH button.
The TV wilt switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the PRE-CN button to quickly
alternate between them.
MENU EXIT [____]