Rotatina
1
After switching the mode to WISELINK, select a memory device that you have installed.
(Refer to page 65)
2
Pressthe ENTER button to select Photo.
JPEG files and existing folders are displayed.
3
Press the A/_r/.qi/_
buttons to select a file_then press the ENTER button.
Pressing the button over a photo icon shows the currently selected photo in full screen.
Press the INFO button to display the option (Slide Show, Rotate, Zoom).
Press the A or T button to select Rotate_ then press the ENTER button.
Each time the ENTER button is pressed, the photo rotates repeatedly.
(900 _180°
_270 ° _0 °)
Rotating directly from 90 degrees to 270 degrees is not allowed.
When rotating a photo_the edge of the photo may not be displayed on the screen.
To exit WISELINK mode, press the WISELtNK button on the remote control.
The rotated file is not saved.
_
Press the WISELtNK button on the remote control to turn on the WISELtNK mode.
function information icon _ed
at the top left of the screen)..
Icon
Current OSD
Function
Rotating (90°)
To rotate a photo by 90 degrees
Rotating (180°)
To rotate a photo by 180 degrees
Rotating (270°)
To rotate a photo by 270 degrees
Rotating (0°)
To rotate a photo by original
i AyE?
i
Condnued...