Samsung HL-TS087S Manual De Usuario página 7

O SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, or HDMI3/DVl).
O MENU
Press to see an on-screen menu of your TV's features.
0 + VOL-
Press to increase or decrease the volume,
In the on-screen menu, use the + VOL - buttons as
you woutd use the 4 and _- buttons on the remote
control.
/'_ CH v
Press to change channels.
In the on-screen menu, use the A CH V buttons as
you woutd use the A and T buttons on the remote
control.
E_ (ENTER)
Press to confirm a selection.
Q POWER
Press to turn the TV on and off.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Indicator Lights
Blinks and turns off when the power is on and tights up
in stand-by mode.
• You can use the channel selection buttons to switch on the TV when it is in standby mode depending on the model.
® When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the
A./_r/_/l_ buttons on the remote control.
• If the remote control no longer works or you have lost it, you can use controls on the panel of the TV.
Indicator Light Key
( O : On, _ : Blinking, (_ : Off)
STANDBY/TEMP TIMER LED indication
Q ',_
0
Standbystate.
0 O _ The picturewill automaticaNy a ppearinabout15 seconds.
(9 • _]b AutoTimer ON/OFF has beenset andthe setwill automaticaNy be turnedon in about15seconds.
(D ,_lJ ([) A coolingfan inside the set isnot operatingnormally.
Checkif theventilationhole onthe side of the setis blocked,because if the innertemperature is too
(D (} (?
high, the power will sht.d off.
_JD ,_J_ (J_ LEDmay be defective Pleasecontacta certified technician.
• It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
• The TV has a fan to keep the inside LED from overheating. You'll occasionally hear it working.