Press the A or T button to select DST (Daylight Saving Time)_then press the ENTER
button.
Press the A or T button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.
Depending on the broadcast station and signat_the auto time may not be set correctly.
If this occurs, set the time manually.
Antenna or Cable must be connected in order to set the time automatically.
O_:)tion 2: Setting_the Clock Manually
1
Press the MENU button.
Press the 4 or _ button to select Setup, then press the ENTER button.
Press the A or T button to select Clock, then press the ENTER button.
2
Press the A or T button to select Clock Mode, then press the ENTER button.
Press the A or T button to select Manual, then press the ENTER button.
3
4
Press the A or _' button to select Clock Set, then press the ENTER button.
Press the 41or 1_button to move to Month, Day, Year, Hour, or Min.
Set the date and time you want by pressing the A or _' button, then press the ENTER
button.
Press the EXIT button to exit.
The current time wilt appear every time you press the INFO button.
You can set the month, day, year, hour, and minute directly by pressing the number
buttons on the remote control.
Settin
the Slee
Timer
The sleep timer automatically
shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
1
Pressthe MENU button.
Press the 4 or 1_button to select Setup, then press the ENTER button.
Press the A or _' button to select Sleep Timer, then press the ENTER button.
The Sleep Timer menu is displayed.
2
Press the A or _r button to select the minute, then press the ENTER button.
To cancel the set sleep timer:
Press the A or T button to select Off, then press the ENTER button.
Press the EXIT button to exit.
_
ress the SLEEP button on the remote control until the appropriate time interval
appears (any of the preset values from "30 rain' to "180 min").
illl ....... @ @ ®OWiiii----iiii
.... '- . .... .......
lt l]
Condnued...