5
Press the A or T button to select Color Tone, then press the ENTER button.
Press the _, or T button to select Cool2, Cootl, Normal, Warm1, or Warm2, then press
the ENTER button.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot
be selected.
Resetting the Picture Settings to the Factory Defaults
7
Press the A or T button to select Reset, then press the ENTER button.
Press the A or T button to select OK or Cancel then press the ENTER button.
Press the EXIT button to exit.
Each picture mode can be reset.