ENGLISH
52
pressure, pulse rate and record number, etc. With 2.8 inch color LCD screen, clear interface, the function
of data review is complete. User can implement ON/OFF, manual measuring, system setup, parameters
change and other operations with seven buttons which are located on the front panel of the device.
The Sphygmomanometer uses audible and visual alarm, when the battery power is low, the buzzer will
intermittent buzzing and LCD screen displays "Low Power" to prompt user replace batteries. When the
measurement data exceeds the set alarm limit, the font color of measurement results will change to red
and the audible alarm will occur, user can open and close the alarm sound according to needs.
With timing shutdown function, if there is no operation and SpO
measurement, the device will
2
automatically turn off after 2 minutes. With USB interface, Users can send measurement results to PC.
Refer to the help or explication of the related software for specific operation.
Purpose
The device apply to measure the non-invasive blood pressure and SpO
of human. Record parameter
2
value of blood pressure to provide the reference for the health care professional.
Warning
Please use the device on the adult object who can read the user manual and the error message shown
on the screen. Read the user manual before use the device in order to take actions according to the
manual when something wrong with the device. For pediatric and neonatal population, measurement
should be only performed by qualified personnel. And please make sure to select the right user mode
and cuff before use .