Chapter 6 Setting The Date And Time - Gima CONTEC08A Manual De Instrucciones

Chapter 6
SETTING THE DATE AND TIME
It is necessary to set date and time after turning on the device.
The Electronic Sphygmomanometer can automatically stores measurement results, date and time.
If dry battery power exhausts or removed, the time to stop.
At the moment, please reset date and time.
The Electronic Sphygmomanometer stores measure results of three users automatically, and up to 100
items for every user. If the date and time are set correctly, the date and time when measuring will be
correct in the memory, otherwise it may not be correct.The results can be uploaded to PC via USB and
processed with the PC software.
Note
Correctly use data upload function:
1. First, make sure the time is right, there are two modes of time setting:
(1) When using the Sphygmomanometer for the first time or after
the Sphygmomanometer has been placed without power supply for a certain
time (more than 5 minutes), after power on, there is a prompt of time error
on the main interface, set date and time with UP, DOWN and ENTER button.
(2) Press MENU button on the main interface to enter system menu, then enter SYSTEM TIME item,
the current time will be displayed on the screen. Set date and time with UP, DOWN and ENTER
button.
ENGLISH 60