71
• Do not perform SpO
of blood flow during NIBP measuring may adversely affect the reading of SpO
• Please don't measure this device with function tester for the device's related information.
• The person who is allergic to rubber can not use this device.
• For the special patients, there should be a more prudent inspecting in the placing process. The device
can not be clipped on the edema and tender tissue.
• The light (the infrared is invisible) emitted from the device is harmful to the eyes, so the user and the
maintenance man should not stare at the light.
• Check if the cable of SpO
probe cable from the socket, "SpO
• Do not use the SpO
it to the vendor.
• The uncomfortable or painful feeling may appear if using the device ceaselessly, especially for the
microcirculation barrier patients. It is recommended that the sensor should not be applied to the same
finger for over 2 hours. Prolonged and continuous monitoring may increase jeopardy of unexpected
change of dermal condition such as abnormal sensitivity, erubescence, vesicle, repressive putrescence,
Particularly in newborns or in a Perfusion disorders and changes or immature skin form of the patient.
According to skin quality change, correct optical path alignment and attachment methods to regularly
check the place of SpO
More frequent examinations may be required for different patients.
• Please refer to the correlative literature about the clinical restrictions and caution.
• This device is not intended for treatment.
• Please don't use the SpO
• When the device is ON, if power interrupt for more than 30s, the SpO
the power is restored, after the device is turned on, ensure that the SpO
measuring and NIBP measuring on same arm at one time, because obstruction
2
probe is in normal condition before measuring. After unplugging the SpO
2
%" and "bmp" on the screen will disappear.
2
probe once the package or the probe is found damaged. Instead, you shall return
2
probe, and change the attachment position when the quality of skin decline.
2
probe during MRI or CT scanning.
2
ENGLISH
value.
2
probe needs no operation after
2
probe can be used normally.
2
2