Gima CONTEC08A Manual De Instrucciones página 86

Guidance and manufacturer's declaration - electromagnetic immunity
for all EQUIPMENT and SYSTEMS
Guidance and manufacturer's declaration - electromagnetic immunity
The device is intended for use in the electromagnetic environment specified below. The customer or
the user of the device should assure that it is used in such an environment.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Surge
IEC 61000-4-5
ENGLISH
IEC 60601 test level
±6 kV contact
±8 kV air
±2 kV for power
supply lines
±1 kV differential
mode
±2 kV common
mode
Compliance level
±6 kV contact
±8 kV air
±2kV for power
supply lines
±1 kV differential
mode
±2 kV common
mode
Electromagnetic
environment - guidance
Floors should be wood,
concrete or ceramic tile.
If floor are covered with
synthetic material,
the relative humidity
should be at least 30%.
Mains power quality
should be that of a typical
commercial or hospital
environment.
Mains power quality
should be that of a typical
commercial or hospital
environment.
86