Caller Id Function; Mem Button - Clarity XLC3.4+ Guia Del Usuario

VOLUME & TONE ADJUSTMENTS
XLC3.4+

CALLER ID FUNCTION

XLC3.4+
Your XLC3.4+ is CID / CWCID compatible (optional service, purchased from
your local telephone service provider).
When your phone is ringing, the screen shows the name and number of the
person calling you. This information will be stored in the Caller List on your
phone.
To access this list, and for further details regarding this function, press UP
or DOWN in standby mode, and / or follow the instructions under CALLER
LIST (page 20).
NOTE: If you have CID service, the date and time will automatically be set
after the first incoming call.

MEM BUTTON

XLC3.4+
The MEM button offers the convenience of easy dialing your most
frequently called phone number. Once the button is programmed, press this
key in standby mode and the phone calls that number without the need for
further key presses.
To program the MEM button:
Press and hold the MEM button; screen displays "MEM" and the blinking
cursor.
Enter the phone number using the numeric keypad; press MENU when
complete.
You will hear 5 beeps and the handset returns to standby mode. Your MEM
button is now programmed and ready to use.
to minimum (VOL 0) before activating the Boost
feature.)
2. Press the TONE button to toggle between the
available tone settings.
Speakerphone
To switch to speakerphone mode, press the SPK
button .

The display shows the speakerphone mode (see
page 18).
E
N
G
L
I
S
H
17