Caller Id Function - Clarity XLC3.4+ Manual Del Usuario

VOLUME & TONE ADJUSTMENTS

CALLER ID FUNCTION

Your XLC3.4+ is CID / CWCID compatible (optional service, purchased from your
local telephone service provider).
When your phone is ringing, the screen shows the name and number of the person
calling you. This information will be stored in the Caller List on your phone.
To access this list, and for further details regarding this function, press
in standby mode, and / or follow the instructions under CALLER LIST (page 20).
If you have CID service, the date and time will automatically be set after the
first incoming call.
amplification. Switching audio tones will change how the
telephone conversation sounds to you.
In order to achieve the best audio experience, we
recommend the following:
1. Adjust the Volume Control and enable the Boost function
(if needed). (Lower the volume level to minimum (VOL 0)
before activating the Boost feature.)
2. Press the
tone settings.
To switch to speakerphone mode, press the

.
The display shows the speakerphone mode (see page 18).
button to toggle between the available
E
N
G
L
I
S
H
button
or
17