Removable Side Plate; Fixed Side Plate - Vermeiren Trigo S Manual De Instalación

EN
NL

3.2.5 Removable side plate

Depth of panel (16)
1. Loosen socket screw (14) and remove socket screw (15).
PL
2. Slide side panel (16) forward/backward and retighten
with socket screw (15) in one of the openings of the
CS
support. Tighten socket screw (14) again.
3. Repeat for the other side panel.
Height of panel (16)
1. Loosen socket screw (15), remove socket screw (14).
2. Slide side panel (16) up/down and retighten with socket
screw (14) in one of the openings of the support. Tighten
socket screw (15) again.
3. Repeat for the other side panel.
Height of complete side plate (18)
1. Remove the side plate from the wheelchair.
2. Remove the socket screw (17).
3. Place the socket screw in another hole according to the
desired height (5 positions available).
4. Firmly tighten the socket screw.
5. Repeat the adjustments above for the second side plate.
Make sure that both side plates and panels are set to the same
height and depth, and that they are firmly secured.

3.2.6 Fixed side plate

Depth of side plate (22)
1. Loosen socket screws (19+20+21).
2. Slide side plate forward/backward and retighten the
socket screws.
Height of side plate (22)
1. Remove socket screws (19+20+21).
2. Move the side plate up/down to the desired height and
retighten it with socket screws (19+20) in one of its
openings. Replace socket screw 21 accordingly.
Repeat the adjustments above for the second side plate.Make sure that both side plates are set
to the same height and dept, and that they are firmly secured.
20
21
8
Trigo S, Trigo T
2019-11
Assembly and adjustments
15
14
16
17
18
17
22
19