CYBEX gold SIRONA S Manual Del Propietário página 56

7. Attach LATCH Connectors to vehicle Lower
Anchor Points. Connectors will make an
audible CLICK when attached. Make sure
they are attached by pulling firmly on
connectors. Do not pull on red Release
Strap.
8. Push Base against vehicle seat back.
Tension LATCH Strap by pulling on loop
until snug. Do not overtighten. Belt
Tensioner will tighten system fully.
After tightening LATCH, route excess strap
across belt path.
56
INSTALLING CHILD RESTRAINT WITH LATCH
7
CLICK!
8
CLICK!