8.
Close Belt Tensioner and use EasyLock to
lock it into place.
a. Position EasyLock so that notches on
arm rest on the tabs on either side of the
Belt Tensioner.
b. Push down on EasyLock to close Belt
Tensioner until it locks in place.
c. Store the EasyLock.
NOTE: If Belt Tensioner does not lock, there
may be too much tension in the lap belt
or LATCH strap. Check both and loosen as
needed before attempting to re-lock.
INSTALLING CHILD RESTRAINT
WITH LAP BELT
8
a
b
83