CYBEX gold SIRONA S Manual Del Propietário página 68

INSTALLING CHILD RESTRAINT WITH LAP/SHOULDER BELT
6. Pull out vehicle belt to form single length of
about 60 cm (24 in). Hold Buckle Tongue in
one hand and squeeze lap and shoulder belts
together in other hand.
7. Route vehicle belts up through vehicle belt
path opening on side of Base, through
Belt Guide, under Belt Tensioner, through
opposite Belt Guide, and down through
opposite belt path opening. BUCKLE THE
BELT. Make sure belts are underneath tabs
on belt guide and lie flat without twisting.
NEVER place vehicle belt over Belt
Tensioner, even in a vehicle with longer
buckle stalks. This will prevent proper
operation of the Child Restraint.
68
(PREFERRED METHOD)
6
7