GE PACE1000 Instrucciones De Seguridad Y Guía Del Usuario página 14

1
1 Power supply adaptor
5 USB B
6.1 RS232 Interface
When using the RS232 interface, a cable must be connected directly from the instrument to a
suitable port on the computer in a 'point to point' link.
The pin connections for the 9-pin D-type, RS232 connector and the relationship between the
instrument and the RS232 control signals, together with device interconnection interface is shown
in Table 1. The instrument is configured as Data Circuit Terminating Equipment (DCE).
K0467 Revision A
CONSULT HANDBOOK
ANALOGUE 1
22V to 26V
2
4
Figure 7 Communication Connectors
2 RS232
6 USB A
5
6
7 Ethernet (option)
13
7
4 IEEE488
[EN] English