GE PACE1000 Instrucciones De Seguridad Y Guía Del Usuario página 3

1 Introduction
The PACE Pressure Indicator measures both pneumatic and hydraulic pressures and displays, on a
colour touch-screen, the measured pressure and instrument status. The touch-screen enables
selections and settings in measuring modes. The instrument can be operated remotely through
communication interfaces.
1.1 Safety
The manufacturer has designed this equipment to be safe when operated using the procedures
detailed in this manual. Do not use this equipment for any other purpose than that stated, the
protection provided by the equipment may be impaired.
This publication contains operating and safety instructions that must be followed to make sure of
safe operation and to maintain the equipment in a safe condition. The safety instructions are
either warnings or cautions issued to protect the user and the equipment from injury or damage.
Use qualified* technicians and good engineering practice for all procedures in this publication.
1.2 Pressure
Do not apply pressures greater than the maximum working pressure to the equipment.
1.3 Toxic Materials
There are no known toxic materials used in construction of this equipment.
1.4 Maintenance
The equipment must be maintained using the procedures in this publication. Further
manufacturer's procedures should be done by an authorized service agents or the manufacturer's
service departments.
1.5 Technical advice
For technical advice contact the manufacturer.
*A qualified technician must have the necessary technical knowledge, documentation, special test
equipment and tools to carry out the required work on this equipment.
1.6 General Specification
Display
Operating temperature
Storage temperature
Ingress protection
Operating humidity
Vibration
Operating altitude
EMC
Electrical safety
Power adaptor
Pressure safety
Pollution degree
Operating Environment
[EN] English
LCD: Colour display with touch-screen
10°C to 50°C (50° to 122°F)
-20°C to 70°C (-4° to 158°F)
IP20 (EN60529)
5% to 95% RH (non-condensing)
MIL-PRF-28800 Type 2 class 5 style E/F
Maximum 2000 metres (6560ft)
EN 61326
EN 61010-1, UL61010-1, CSA 22.2, No. 61010-1 and IEC61010-1
Input range: 100 - 240VAC, 50 to 60Hz, 660mA. Installation category
II
Pressure Equipment Directive - class: sound engineering practice
(SEP) for group 2 fluids.
2
Indoor use only. Not rated for use in potential explosive
atmospheres.
2 K0467 Revision A