Method Of Connection - GE PACE1000 Instrucciones De Seguridad Y Guía Del Usuario

3.3 Connections
1. Switch off the power supply before connecting or disconnecting the instrument.
2. Use the appropriate sealing method for all pressure connections.
Note: For instruments with NPT connections, use applicable bonded sealing as shown in figure
below.

3.4 Method of connection

ISO 228 G1/8
bonded seal
Recommended method
3.5 Adaptors
IO-SNUBBER-1
IO-ADAPT-9/16AUTOC
ISO 228 Male to 9/16 Autoclave
IO-ADAPT-1/8NPT
ISO 228 Male to 1/8 NPT Female
IO-ADAPT-1/4NPT
ISO 228 Male to 1/4 NPT Female
Refer to the data sheet for the range of adaptors.
K0467 Revision A
IO-ADAPT-G1/4
ISO 228 Male to G1/4 Female
ISO 228 G1/8
bonded seal
Alternative method below 100 bar
IO-DIFFUSER-1
IO-ADAPT-7/16UNF
ISO 228 Male to 7/16 UNF Female
IO-ADAPT-AN4
ISO 228 Male to AN4 37° Male
IO-ADAPT-AN6
ISO 228 Male to AN6 37° Male
IO-ADAPT-BARB
ISO 228 Male to 1/4 Hose
7 [EN] English