Declaration Of Conformity; Product Marking; Marking Explanation - Nederman E-PAK 150 DX Manual De Instrucciones

1

Declaration of conformity

We, AB Ph. Nederman & Co., declare under our sole responsibility that the
Nederman product:
E-PAK 150 DX/300 DX/500 DX with accessories to which this declaration
relates, is in conformity with the following:
Directives
2004/108/EC, 2006/95/EC, 2006/42/EC, 94/9/EC.
Standards
EN ISO 12100-1/2, EN 60204-1, EN 61000-6-4, EN 61000-6-2, EN 1127-1,
EN 60079-0, EN 13463-5.
Standards (suppression only)
EN 14373.
The technical manager is responsible for the technical documentation.
AB Ph. Nederman & Co.
P.O. Box 602
SE-251 06 Helsingborg
Sweden
Lena Åberg
Manager, Development & Engineering
1.1

Product marking

E-PAK 150 DX/300 DX/500 DX is ATEX-classified and marked:
CE II 1/– D c T4
1.1.1

Marking explanation

II
1/–
D
c
T4
E-PAK 150 DX/300 DX/500 DX
Equipment group (non-mining equipment).
Equipment category: 1/–
Inside unit (filter): Category 1.
Outside unit: – (not approved for installation in Ex-classified
areas).
Intended for use with combustible (and non-combustible) dust.
Protection method used is constructional safety according to
EN 13463-5.
Temperature class 4, maximum surface temperature of the
product is 135 °C (275 °F).
EN
23