Dismantling And Repairs - Festo DNCI Serie Instrucciones De Utilizacion

DNCI−...
8 Care and maintenance
Do not adjust screws or threaded pins for which there is no direct request for
S
modification in these operating instructions.
In this way you will prevent damage to the cylinder at a later stage.
Cleaning
Clean the exterior of the DNCI−... with a soft cloth.
S
The following cleaning agents are permitted:
soap suds (max. + 60 °C)
petroleum ether
all non−abrasive cleaning agents.
9

Dismantling and repairs

Dismantling
Warning
There is a danger of injury caused by pres
sure forces which can eject the sensor if
the connecting screws are loosened under
pressure.
S Make sure that the following sources of
energy are switched off:
the operating voltage
the compressed air (drive exhausted
on both sides).
The sensor projects into the pressure
chamber of the DNCI−... .
Festo DNCI−... 0610a English
Fig. 17
29