Oven Racks - Bosch mTwisT Serie Manual De Uso Y Cuidado

Your Life ...

Oven Racks

Depending on model, the range is equipped with either
three flat racks or two flat racks and one full extension
rack. The racks are designed with a stop so they will
stop before coming completely out of the oven and not
tilt.
The Flat Rack
Front of Rack
To avoid possible burns, place oven racks in desired
positions before turning the oven on. Always use
oven mitts when the oven is warm. If a rack must be
moved while the oven is hot, do not let oven mitts
contact hot heating elements.
Removing from oven: Grasp rack firmly on both sides
and pull rack toward you. When the stop is reached, tilt
rack up and pull the rest of the way out.
Replacing in oven: Grasp rack firmly on both sides.
Tilt rack up to allow stop into rack guides. Bring rack to
a horizontal position and push the rest of the way in.
Rack should be straight and flat, not crooked.
Note: The full extension rack must be in the closed
position when removing and replacing. Grasp the entire
rack (both sections).
The Full Extension Rack (some models) allows for
easier access to cooking foods. The bottom section
extends as far as the standard flat rack. However, the
top section extends beyond the bottom section bringing
the food closer to the user. To order a full extension
rack, contact Bosch Service: 800-944-2904 for a dealer
near you.
Use: First, grasp the bottom section and pull straight
out. Once the stop is reached, grasp the top section
and pull straight out until the second stop is reached.
Cleaning: Clean rack with hot sudsy water. Dry
thoroughly. For stubborn dirt, use a soap filled steel
wool pad. DO NOT clean the rack in the self-
cleaning oven.
The two sections of the rack are designed to
come apart for easier cleaning. To do so, place rack
on flat surface in the closed position top side up. Rotate
one side of top rack towards you until it is past the stop
(ball). Pull the rack up and out, rotated side first (See
Figure 2). To reassemble rack, hold top rack
diagonally across bottom rack. Insert one side of top
rack to closed position. Rotate the other side toward
the back of the rack until it passes the stop (ball). Push
top rack the rest of the way in (See Figure 3).
If the top rack will not extend fully, it is not installed
correctly. Reinstall it so that the pan stop is in the back
of the oven.
12 • English
Oven Modes and Features
Back of Rack
CAUTION:
Back of Rack
Top Rack
Bottom Rack
Stops
Front of Rack
Figure 1 - The Full Extension Rack
Closed
Back of Rack
Position
Figure 2 - Taking the Rack Apart
Closed
Position
Bottom Rack
Closed
Back of Rack
Position
Front of Rack
Figure 3 - Putting the Rack Together
CAUTION:
Always verify that top rack is installed correctly after
reassembly. The back edges of the top rack must be
under the rack guide on the bottom rack. DO NOT
simply rest the top rack on top of the bottom one.
Pan Stops
Rack
Guide
Top
Rack
Rest
Front of Rack
Top Rack