Setting Up Your Range - Bosch mTwisT Serie Manual De Uso Y Cuidado

Setting the Clock
(after power to the range has been off)
• Always set the clock after installation or after a power failure. Once power returns to the oven, the clock defaults
to 12:00 am.
• The time of day is displayed in hours and minutes.
• The clock time will appear during all oven operations except when the timer and oven are running. Turn knob to
display clock when timer is displayed.
• The oven is preset to a 12 hour clock and indicates AM and PM.
• The clock display can also be turned off (See Clock Display, Page 5)..
Note: To switch to a 24 hour clock, see "Select Function"
section.
1. CLOCK will be displayed and the hour digits will
flash.
Turn knob to select hour and AM or PM.
2. Touch TIME. CLOCK will still be displayed and the
minute digits will flash.
3. Turn knob. Set minutes.
4. Touch TIME and the clock is now set.
Changing the Clock Time
1. Touch Time. TIMER 1 will flash in display.
2. Turn knob to select CLOCK .
3. Touch TIME again and hour digits will flash.
4. Turn knob to change hours.
5. Touch TIME again and minute digits will flash.
6. Turn knob clockwise or counterclockwise to change
minutes.
7. Touch TIME again and the clock is set.

Setting Up Your Range

HR:MIN
TIMER
... Our Inspiration
1 1 1 1 1 2 2 2 2 2 : 00
AM
CLOC CLOC CLOC CLOC CLOCK K K K K
BEEP REMINDER
If operation is not completed,
the oven will beep periodically
as a reminder to set clock
time. Push OFF.
0: 00 0: 00 0: 00 0: 00 0: 00
AM
TIMER 1 TIMER 1 TIMER 1
TIMER 1 TIMER 1
Helpful Hint
To cancel the TIME
selection when setting the
clock, touch OFF at any time
while in the clock mode.
English • 5