Klarstein Steakreaktor Pro Manual Del Usuario página 31

Turning on the unit and setting the temperature
To turn on the device, press the power button on the back of the device. For a short
moment, the software version will be displayed, e.g. R09. The controller may be used
to increase or decrease the temperature setting of the heating element. The maximum
temperature is 850 °C. Press the dial to confirm the set temperature.
Adjust cooking time
After confirming the grill temperature, you can set the time. The extreme temperature
of up to 850°C poses a potential hazard. For this reason, the maximum adjustable
operating time is 10:00 minutes. You may freely select this value between 200 °C
and 850 °C. Press the controller to confirm the cooking process. After re- aching the
preset temperature, the countdown of e.g. 10:00-00:00 will begin. At the end of the
countdown, an acoustic signal will sound and the device will automatically switch off.
If you want to continue the grilling process, press the controller twice. The last preset
values will be taken on and the grilling process will continue.
Temperature
Time
Preheating
During operation, the high temperature grill displays the current temperature measured
by a temperature sensor built into the heating element. As soon as the set target
temperature is reached, an acoustic signal sounds. The temperature display then
oscillates ± 20 °C around the target value.
• Turn right to increase
• Turn left to decrease
• Press to confirm/cancel
EN
31