Before First Use - Klarstein Steakreaktor Pro Manual Del Usuario

BEFORE FIRST USE

Unpacking
1. Take the unit and accessories out of the box.
2. Keep the two wrapping cartons and the enclosed padding for the steak reactor.
Only with this special packaging a safe transport is possible in case of complaint.
3. Remove the remaining accessories from the interior of the grill.
4. Carefully remove all packaging and check that the interior is free from packaging
material. Check the appliance and especially the heating element and cable for
damage.
Delivery
Check that the delivery is complete and inspect all parts for any damage. If anything is
missing or damaged, please immediately contact our customer service. The following
parts are included with delivery:
• High temperature grill
• Grill attachment
• Grate
• Drip tray
• Guide handle for the grate and the drip tray
• Grease drip tray
Setup
• When setting up, ensure that there is a sufficient distance between the device and
strong heat sources such as hot plates, heating tubes, etc.
• Avoid heat build-up and place the unit in an area that allows heat occurring during
use of the device to dissipate.
• The minimum distance on the sides of the device must be at least 15 cm. Above,
there must be a minimum distance of 50 cm. The feet also serve as spaces
underneath the device.
• During the first use, smoke and odours may result from the burning of care oils.
Therefore heat the device while it is empty (without food) for about 10 minutes in a
well-ventilated room with the grill and drip tray intact.
• Do not place the device under a wall cabinet or in a corner. Keep a safe distance
from flammable materials such as curtains or tablecloths.
• Set the appliance on a stable, flat, heat-resistant surface.
EN
29