Klarstein Steakreaktor Pro Manual Del Usuario página 41

Problem
The outside of the device is
very hot.
Error Codes
F01, F02, F03, F04, F16
F05
Err, Hot
Possible reason
Grill insert not in place.
Blocked vents.
Blocked air intakes.
When the following error codes are shown on the
display, please contact customer support: F01, F02,
F03, F04, F16.
The code F05 indicates that the heating process to
achieve the set cooking temperature could not be
completed within 10 minutes. The heating process is
aborted. Possible cause: the device is exposed to a
strong cooling wind or a very cold environment, or
both. The error may be acknowledged by pressing the
knob, and then the display will be returned to its normal
position. Should the error repeatedly occur under
normal conditions, for example, at room temperature,
there may be a defect. In this case please contact
customer support.
If Err and Hot are displayed, the device has overheated
in the lower part, where the control electronics are
located. Under normal operations, this area should not
be hotter than 50 °C. Should overheating nonetheless
occur, the device will switch off. Please allow it to cool
before operating again.
Solution
Turn the unit off and allow
to cool completely, then
insert the grill insert.
Remove any items that
may be blocking the vents.
Make sure that the air
intakes underneath the unit
are free.
EN
41