GreenWorks 20332 El Manual Del Propietario página 16

OPERATION
OIL
RESERVOIR
CA
QUICK VIEW
OIL INDICATOR
cONNEcTING TO POWER SUPPLY (See Fig. 7)
This chainsaw is designed with a cord retainer that prevents the extension cord from being pulled
loose while using.
• form a loop with the end of the extension cord.
• Insert loop portion of extension cord through the opening in the side of the rear handle,
and place over cord retainer.
• Slowly pull loop against cord retainer until the slack is removed.
• Plug chainsaw into extension cord.
NOTE: Failure to remove all excess cord slack from extension cord retainer could result in plug loosening
from receptacle.
STARTING ANd STOPPING THE cHAINSAW (See Fig. 8)
W A R N I N G
Keep body to the left of the chain line. Never straddle the saw or chain, or lean over past the
chain line.
Fig. 6
16
Fig. 7
EXTENSION
CORD