GreenWorks 20332 El Manual Del Propietario página 35

MAINTENANCE
MAINTAINING DEPTH GAUGE CLEARANCE
• Maintain the depth gauge at a clearance of .025" (.6 mm). Use a depth gauge tool for checking
the depth gauge clearances.
•
•
depth gauge jointer. After lowering each depth gauge, restore original shape by rounding the
•
gauges.
MAINTAINING THE GUIDE BAR (See Fig. 36)
C A U T I O N
Make sure the chain has stopped before you do any work on the saw.
Every week of use, reverse the guide bar on the saw to distribute the wear for maximum bar life.
The bar should be cleaned every day of use, and checked for wear and damage. Feathering or
burring of the bar rails is a normal process of bar wear. Such faults should be smoothed with a
• Wear inside the bar rails that permits the chain to lay over sideways
• Bent guide bar
• Cracked or broken rails
• Spread rails
Lubricate guide bars weekly with a sprocket at their tip. Using a grease syringe, lubricate weekly
in the lubricating hole. Turn the guide bar and check that the lubrication holes and chain groove
are free of impurities.
LUBRICATING HOLE
35
Fig. 36