GreenWorks 20332 El Manual Del Propietario página 18

OPERATION
PREPARING FOR cUTTING
PROPER GRIP ON HANdLES (See Fig. 9)
See General Safety Rules for appropriate safety equipment.
• Wear non-slip gloves for maximum grip and protection.
• Hold the saw firmly with both hands. Always keep your left hand on the front handle and
your right hand on the rear handle so that your body is to the left of the chain line.
• Maintain a proper grip on the saw whenever the motor is running. The fingers should
encircle the handle, with the thumb wrapped under the handlebar. This grip is least likely
to be broken by a kickback or other sudden reaction of the saw. Any grip in which the
thumb and fingers are on the same side of the handle is dangerous, because a slight kick
of the saw can cause loss of control.
W A R N I N G
Never use a left-handed (cross-handed) grip or any stance that would place your body or arm
across the chain line.
PROPER HANd
GRIP POSITION
W A R N I N G
DO NOT operate the switch trigger with your left hand and hold the
front handle with your right hand. Never allow any part of your body
to be in the chain line while operating a saw.
18
Fig. 9
cHAIN
LINE