Muting The Transmitters; Activating/Deactivating The Lock Mode - Sennheiser evolution wireless Serie Instrucciones Para El Uso

SK 100 G2
SKP 100 G2
Switching the radiomicrophone on/off
Turn the protective cap
the ON/OFF button becomes accessible.
Press the ON/OFF button to switch the radiomicrophone on. The red LED
lights up.
To switch the radiomicrophone off, press the
"OFF" appears on the display. The red LED

Muting the transmitters

All transmitters have a MUTE
audio signal without switching the transmitter off.
Muting the SK 100 G2 and SKP 100 G2 transmitters
Set the MUTE switch to the position 'MUTE'. The "MUTE" display appears
on the transmitter display panel. Provided that the pilot tone function is
activated on both the transmitter and the receiver, the "MUTE" display
also appears on the receiver display panel.
Set the MUTE switch back to the original position to retransmit the audio
signal.
Muting the SKM 100 G2 radiomicrophone
Turn the protective cap
the MUTE switch becomes accessible.
Set the MUTE switch to the position 'MUTE'. The "MUTE" display appears
on the transmitter display panel. Provided that the pilot tone function is
activated on both the transmitter and the receiver, the "MUTE" display
also appears on the receiver display panel.
Set the MUTE switch back to the original position to retransmit the audio
signal.

Activating/deactivating the lock mode

All transmitters and receivers have a lock mode that can be activated or deac-
tivated via the operating menu (see: „Activating/deactivating the lock
mode" on page 35). The lock mode prevents that the transmitter or receiver
is accidentally programmed or switched off during operation.
at the bottom of the radiomicrophone so that
ON/OFF
goes off.
switch that noiselessly mutes the transmitter's
at the bottom of the radiomicrophone so that
button until
23