3M Ultimate FX Manual Del Usuario página 14

For Compliance in Brazil NOTE:
1. In Brazil, according to the Respiratory Protection Program of the Ministry of Labor, do not use quantitatively fit tested full facepiece respirators when
concentrations of contaminants are greater than 100 times the permissible exposure limit in air-purifying mode.
2. Do not use in deficient or enriched oxygen atmospheres.
3. Storage, Transportation and Care: store in a clean and dry place and away from contaminants and extreme temperature and humidity.
4. The components of this respirator are made of materials which are not expected to cause adverse health effects.
5. It is necessary to have special care to use this product in explosives atmospheres.
6. In Brazil do not use powered air-purifying respirators if airflow is less than 120 lpm for tight fitting facepieces or 170 lpm for hoods and/or helmets.
Product Manufacturing Date
The parts of the product show markings that bring information of manufacturing date, and its reading is described as in the example below:
Date Code = 12 month 2019 (12/19)
th
12
11 1
10 2
1 9
9 3
8 4
7 5
6
FOR MORE INFORMATION
In United States, contact:
Website: www.3M.com/workersafety
Technical Assistance: 1-800-243-4630
For other 3M products:
1-800-3M-HELPS or 1-651-737-6501
13
(English)
98-0060-0135-2_6
34-8723-6751-0