baltur TBL 85P Manual De Instrucciones página 19

ELECTRODES/IONISATION PROBE ADJUSTMENT DIAGRAM
Model
TBL 85P - 85P DACA
TBL 105P - 105P DACA
TBL 130P - 130P DACA
TBL 160P - 160P DACA
TBL 210P
After having installed the nozzle, check the correct position of the
electrodes and disk according to the following levels. It's adviseable
to check levels after every intervention on head.
To prevent damage to the support effect nozzle assembly/
!
disassembly tasks with the aid of a wrench and counter-
wrench.
The use of an ionisation angle of 45° may significantly improve
!
combustion values with certain applications (e.g. narrow
combustion chambers).
A B C
2 ÷ 2,5 19 5
2 ÷ 2,5 19 5
2 ÷ 2,5 19 5
2 ÷ 2,5 19 5
12 ÷ 12,5 29 15
Legend:
1- Diffuser
2- Deflector disk
3- Nozzle holder
4- Ignition electrodes
5- Nozzle
RECOMENDED NOZZLES
MONAMRCH tipo PLP 60° (TBL 85P)
MONARCH tipo PLP 60° (TBL 105P)
MONARCH tipo PLP 60° (TBL 130P)
STEINEN tipo SS 45° (TBL 160P)
STEINEN tipo SS 45° (TBL 210P)
13 / 20
0006081322_201101
N°0002935131
REV.: 21/01/08
D E
2 ÷ 3 7,5 ÷ 8,5
2 ÷ 3 7,5 ÷ 8,5
2 ÷ 3 7,5 ÷ 8,5
2 ÷ 3 7,5 ÷ 8,5
2 ÷ 3 7,5 ÷ 8,5
E
N
G
L
I
S
H