Controls And Indicators; Display; Push-Buttons; Leds - Adixen H2000 PLUS 5.0 Manual Del Usuario

5. Controls and indicators

GB

Display

The display shows:
• The indicator bar in Detection Mode
and the figures in Analysis Mode or both
in Combined Mode.
• The seven main menus. Their positions
are indicated on a horizontal scale. Move
from one menu to another using the < and >
buttons. Press Enter to select a menu.
• The main menus have submenus, which
are also indicated by horizontal bars and
can be selected using the < > buttons and
Enter.
• Menues for setting numeric values, langu-
ages, etc.
• Messages.
• A battery status indicator in the upper
right corner. (H2000-C
page 33).

Push-buttons

The functions of the push-buttons are
shown at the lower edge of the display.
• Move from one menu item to another
using the < and > buttons.
• Press Enter to move down to the nearest
submenu.
• Press Save to save the set value.
• Press Undo to restore the previously set
value.
• Press Esc to move up to the nearest higher
level(s).
10
Adixen Scandinavia - User's manual H2000 PLUS
only, see
PLUS

LEDs

The two LEDs indicate the status of the
instrument as follows:
• Green fixed light, red flashing slowly,
during warming up phase.
• Green fixed light means normal condi-
tions.
• Red fixed light together with LEAK on
display means the instrument has detected
a leak larger than the set alarm limit.
• Red flashing rapidly, see Trouble-shooting
on page 36.
Loudspeaker Display
Earphone
Control
Socket
Push-
buttons
The display has a "screen-saver"
function. See page 21.
LEDs
Probe
Connector