Display Settings - Adixen H2000 PLUS 5.0 Manual Del Usuario

Display Settings

GB
Select the main menu Display Settings
as described on page 12.
1. Press Enter.
2. Select
Contrast
Brightness or
Screen Save Timeout
3. Press Enter.
4. Adjust the desired parameter using +
and –.
(5. Press Undo to delete the setting and
revert to the previous value.)
6. Press Save to save the set value. The set-
ting scale will flash to confirm the setting.
Revert to Detection Mode/Analysis
Mode/Combined Mode by pressing
Esc twice.
Explanations
To obtain a good screen display, adjust the brightness and contrast to suit the current
light conditions at the work place. To save energy and prolonge lamp life you can
choose a lower brightness value.
The Screen Save Timeout can be set between 1 and 60 minutes. At the timeout
the LCD backlight is automatically reduced. Display returns to normal brightness
when a button is pressed, gas is being detected or an instrument error is detected. The
function is deactivated if set to Zero.

Adixen Scandinavia - User's manual H2000 PLUS
Display Settings
Esc <
Display settings
Contrast
Esc <
2
Display settings
Contrast
Set Contrast
0
Undo +
5 4
> Enter
1
> Enter
3
– Save
6