General Settings - Adixen H2000 PLUS 5.0 Manual Del Usuario

General Settings

Select the main menu General Settings
as described on page 12.
1. Press Enter.
2. Select:
Language
Measure/Print Button
Change Password
Set Clock
Set Date
Printer Port
3. Press Enter. If Enter Password is dis-
played, this means that the setting function
is protected by a password, see page 29.
4. Set the desired value using + and – or as
described on the following page.
(5. Press Undo to delete the setting and
revert to the previous value.)
6. Press Save to save the set value. The set-
ting scale will flash to confirm the setting.
Revert to Detection Mode/Analysis
Mode/Combined Mode by pressing
Esc twice.
Esc
Esc
Undo
5
When Measure/Print Button is
selected the left button is dedicated
as start button for active measure-
ment when e.g. probe AP29 or AP33
is used.
Adixen Scandinavia - User's manual H2000 PLUS
General Settings
< > Enter
1
General settings
Language
English
< > Enter
2 3
General settings
Language
Choose Language
English
+ – Save
6
4
GB