Menu System; Main Menus - Adixen H2000 PLUS 5.0 Manual Del Usuario

6. Menu system

The menu system is designed in the form
of a tree structure similar to that used in
mobile telephones. The display shows all
the levels when browsing down through the
menus so that you can always see exactly
where you are.

Main menus

To enter the menus, press Menu (button
on the far right). Press < and > to move
between the seven main menus, which
are explained in detail on the following
pages.
Change Test Mode
Move between Detection Mode, Ana-
lysis Mode and Combined Mode.
See page 13.
Calibration
Move between Calibrate, Calibration
Coefficient, Calibration Time, and
Password Protected Calibration.
The instrument must be calibrated to ensure
that the correct values are displayed in the
Analysis Mode. Calibration is described
on page 14 and 29.
Detection Mode Settings
Move between Sensitivity, Auto Range,
Direct Sensitivity Adjustment, and
Lowest Frequency. See page 17 and
18.
Volume
Esc
Esc
Esc
Adixen Scandinavia - User's manual H2000 PLUS
Active Mode: Detection
0.0 ppm
Sensitivity
–  + Menu
Change Test Mode
< > Enter
Calibration
Calibrated
00-10-1 11:0:
< > Enter
Detection Mode Settings
< > Enter
GB
11