Declaration Of Conformity - Kyocera MITA PF-60 Guía De Instrucciones

Alimentador de papel, duplexor, clasificador para las impresoras de páginas mita
Tabla de contenido

Publicidad

Note
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by the
manufacturer for compliance could void the user's authority
to operate the equipment.
According to Council Directive 89/336/EEC
PF-60
and 73/23/EEC
Manufacturer's name:
Kyocera Mita Corporation, Tamaki Plant
Manufacturer's address:
704-19 Nojino, Tamaki-cho, Watarai-gun,
Mie-ken 519-0497, Japan
declares that the product
Product name:
Paper Feeder
Model number:
PF-60 (as tested with Printer FS-1800 and
enhancement optional units DU-60 and SO-60)
Conforms to the following product specifications.
EN 55 022:1998 Class B
EN 55 024:1998
EN 60 950:1992+A1+A2+A3+A4+A11
The manufacturer and its merchandising companies retain the following
technical documentation in anticipation of the inspection that may be
conducted by the authorities concerned.
User's instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information
PF-60 Declaration of Conformity
Manufacturer's name:
Kyocera Mita Corporation, Tamaki Plant
Manufacturer's address:
704-19 Nojino, Tamaki-cho, Watarai-gun,
Mie-ken 519-0497, Japan
declares that the product
Product name:
Paper Feeder
Model number:
PF-60 (as tested with Printer FS-1800 and
enhancement optional units DU-60 and
SO-60 etc.)
Description of device:
This Page Printer Model FS-1800 is the
16ppm; up to A4 size plain paper, laser, dry
toner etc. The printer can be equipped with
several enhancement optional units such as
the paper feeder PF-60, duplexer DU-60 etc.
Conforms to the following product specifications.
AS/NZS 3548:1995
(EN 55 022:1998 Class B)
IEC60 950:1991+A1+A2+A3+A4
(EN 60 950:1992+A1+A2+A3+A4+A11)
The manufacturer and its merchandising companies retain the following
technical documentation in anticipation of the inspection that may be
conducted by the authorities concerned.
User's instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information
The manufacturer has been employed with ISO9001 scheme. The
manufacturer has been attested by JQA and BS.
According to Council Directive 89/336/EEC
DU-60
and 73/23/EEC
Manufacturer's name:
Kyocera Mita Corporation, Tamaki Plant
Manufacturer's address:
704-19 Nojino, Tamaki-cho, Watarai-gun,
Mie-ken 519-0497, Japan
declares that the product
Product name:
Duplexing Unit
Model number:
DU-60 (as tested with Printer FS-1800 and
enhancement optional units PF-60 and SO-60)
Conforms to the following product specifications.
EN 55 022:1998 Class B
EN 55 024:1998
EN 60 950:1992+A1+A2+A3+A4+A11
The manufacturer and its merchandising companies retain the following
technical documentation in anticipation of the inspection that may be
conducted by the authorities concerned.
User's instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mita du-60Mita so-60

Tabla de contenido