Tabla de contenido
Publicidad
DU-60 Declaration of Conformity
Manufacturer's name:
Kyocera Mita Corporation, Tamaki Plant
Manufacturer's address:
704-19 Nojino, Tamaki-cho, Watarai-gun,
Mie-ken 519-0497, Japan
declares that the product
Product name:
Duplexing Unit
Model number:
DU-60 (as tested with Printer FS-1800 and
enhancement optional units PF-60 and SO-60)
Description of device: This Page Printer Model FS-1800 is the 16ppm; up
to A4 size plain paper, laser, dry toner etc. The
printer can be equipped with several enhancement
optional units such as the paper feeder PF-60,
duplexer DU-60 etc.
Conforms to the following product specifications.
AS/NZS 3548:1995
(EN 55 022:1998 Class B)
IEC950:1991+A1+A2+A3+A4
(EN 60 950:1992+A1+A2+A3+A4+A11)
The manufacturer and its merchandising companies retain the following
technical documentation in anticipation of the inspection that may be
conducted by the authorities concerned.
User's instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information
The manufacturer has been employed with ISO9001 scheme. The
manufacturer has been attested by JQA and BS.
KYOCERA MITA AUSTRALIA PTY., LTD
6-10, Talavera Road North Ryde,
NSW 2113, Australia
Phone: +61 2-9888-9999
Fax: +61 2-9888-9588
According to Council Directive 89/336/EEC
SO-60
and 73/23/EEC
Manufacturer's name:
Kyocera Mita Corporation, Tamaki Plant
Manufacturer's address:
704-19 Nojino, Tamaki-cho, Watarai-gun,
Mie-ken 519-0497, Japan
declares that the product
Product name:
Sorter
Model number:
SO-60 (as tested with Printer FS-1800 and
enhancement optional units PF-60 and DU-60)
Conforms to the following product specifications.
EN 55 022:1998 Class B
EN 55 024:1998
EN 60 950:1992+A1+A2+A3+A4+A11
The manufacturer and its merchandising companies retain the following
technical documentation in anticipation of the inspection that may be
conducted by the authorities concerned.
User's instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information
SO-60 ISO 7779
Maschinelärminformationsverordnung 3. GSGV . 18.01.1991: Der höchste
Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß ISO 7779.
3
SO-60 Declaration of Conformity
Manufacturer's name:
Kyocera Mita Corporation, Tamaki Plant
Manufacturer's address:
704-19 Nojino, Tamaki-cho, Watarai-gun,
Mie-ken 519-0497, Japan
Product name:
Sorter
Model number:
SO-60 (as tested with Printer FS-1800 and
enhancement optional units PF-60 and DU-60)
Description of device:
The SO-60 is an optional unit for use with
model FS-1800 printer. It receives printed
paper from the printer.
Conforms to the following product specifications.
AS/NZS 3548:1995
(EN 55 022:1994 Class B)
IEC950
(EN 60 950:1992+A1+A2+A3+A4+A11)
The manufacturer and its merchandising companies retain the following
technical documentation in anticipation of the inspection that may be
conducted by the authorities concerned.
User's instruction that conforms to the applicable specifications
Technical drawings
Descriptions of the procedures that guarantee the conformity
Other technical information
KYOCERA MITA AUSTRALIA PTY., LTD
6-10, Talavera Road North Ryde,
NSW 2113, Australia
Phone: +61 2-9888-9999
Fax: +61 2-9888-9588
Canadian Department of Communications
SO-60
compliance statement
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformité aux normes du
SO-60
ministère des Communications du Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
SO-60 IMPORTANT SAFEGUARDS
1. Read all of these instructions and save these instructions for later use.
2. Unplug this product from the wall outlet before cleaning.
3. Do not use this product near water.
4. Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious damage to the product.
5. This product is equipped with a 3-wire grounding type plug, a plug
having a third (grounding) pin. This plug will only fit into a grounding-
type power outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the purpose of the grounding-type plug.
6. Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.
7. If an extension cord is used with this product, make sure that the total of
the ampere ratings on the products plugged into the extension cord do
not exceed the extension cord ampere rating.
8. Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in a risk of fire or electric shock. Never spill liquid of any kind on
the product.
9. Except as explained elsewhere in the Operation Guide, do not attempt to
service this product yourself. Removing covers may expose you to
dangerous voltage points or other risks. Refer all servicing in those
compartments to service personnel.
10. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A — When the power cord or plug is damaged or frayed.
B — If liquid has been spilled into the product.
C — If the product has been exposed to rain or water.
D — If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions since improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to
normal operation.
E — If the product has been dropped or the cabinet has been damaged.
Publicidad
Tabla de contenido
