Stihl FS 240 Manual De Instrucciones página 20

English
Approved Combinations
The complete combination includes:
Cutting attachment
–
Deflector
–
Handle
–
Harness
–
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments, deflectors, handles and
harnesses shown in each row of the
table may be used together. No other
combinations are permitted because of
the risk of accidents.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 20 - 2
2 STIHL AutoCut 25 - 2
3 STIHL AutoCut 30 - 2
4 STIHL TrimCut 31 - 2
5 STIHL DuroCut 20 - 2
6 STIHL PolyCut 20 - 3
Metal cutting attachments
7 Grass cutting blade 230 - 4
8 Grass cutting blade 230 - 8
9 Brush knife 250 - 3
10 Scratcher tooth circular saw blade
200
11 Chisel tooth circular saw blade 200
18
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stop
12 Deflector for mowing heads
13 Deflector with
14 Skirt and blade for mowing heads
15 Deflector without Skirt and blade for
metal cutting attachments, items 7
to 9
16 Limit stop for circular saw blades
Handles
17 Loop handle
18 Loop handle with
19 Barrier bar
20 Bicycle handle
Harnesses
21 Shoulder strap must be used
22 Full harness may be used
23 Full harness must be used
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment.
Use grass cutting metal blades and
brush knives on this unit only if equipped
with a bike handle or a loop handle with
barrier bar.
Use circular saw blades on this unit only
if equipped with a bike handle.
Do not use rigid plastic blades on this
unit.
FS 240, FS 240 R