Mounting The Bike Handle - Stihl FS 240 Manual De Instrucciones

Mounting the Bike Handle

Attaching the bicycle handle with
rotating handlebar support
The machine is delivered with the
rotating handlebar support already
attached to the shaft. The clamps must
be removed in order to attach the
handlebar.
FS 240, FS 240 R
Removing the clamps
hold onto the lower (1) and upper
N
clamps (2)
Unscrew the tommy screw (3) –
N
after the tommy screw has been
unscrewed, the parts are loose and
are pressed apart by the two
springs (4, 5)!
Remove the tommy screw – the
N
washer (6) remains on the tommy
screw
2
1
Hold onto the lower clamp (1) and
N
remove the upper clamp (2) – in
doing so, separate the parts so that
the springs (4, 5) retain their
position in lower clamp
5
1
If the spring (5) has slipped out of the
lower clamp (1):
Replace and/or press the spring into
N
the groove of the clamp as shown
English
4
5
19