Nozzle Cleaning And Replacement - Ecoflam MAIOR P 700.1 PR Manual Del Usuario

Use only the suitable box wrench provided for this operation to remove the nozzle, taking care to not dama-
ge the electrodes. Fit the new nozzle with the same care.
Note: Always check the position of electrodes after having replaced the nozzle (see illustration). A wrong
position could cause ignition troubles.
DESCRIPTION OF THE CONTROL PANEL OF THE BURNER
F

NOZZLE CLEANING AND REPLACEMENT

DISASSEMBLY FIRING HEAD
AUTO
0
I
0
27
420010300700 Maior P 700.1 / 1200.1 PR
3÷4 mm
A - selector :
A
B
0 = operating elements locked in an
intermediate position
C
1 = operation on maximum capacity
D
2 = operation on minimum capacity
E
3 = automatic operation
B - working lamp
C - termal lock-out lamp
D - fuse
E - main switch I / O
F - reset key
EN
5÷6 mm