Orbegozo FDI 94 Manual De Instalación página 114

MANDO A DISTANCIA FDI 94 124 184 244
1. ON/OFF: This button turns the air conditioner ON and OFF.
2. MODE: Press this button to modify the air conditioner mode in a sequence of
following:
3. FAN SPEED: Used to select he fan speed in four steps:
4. SLEEP: Active/Disable sleep function. It can maintain the most comfortable
temperature and save energy. This function is available on COOL, HEAT or AUTO
mode only.
5. TURBO: Active/Disable Turbo function. Turbo function enables the unit to reach the
preset temperature at cooling or heating operation in the shortest time (if the
indoor unit does not support this function, there is no corresponding operation
happened when pressing this button).
6. SELF CLEAN (Opcional).
7. ▲ ▼: Push▲ to increase the indoor temperature setting in 1ºC increments to 30ºC.
Push ▼ to decrease the indoor temperature setting in 1ºC increments to 17ºC.
8. SHORT CUT: used to restore the current settings or resume previous settings.
9. TIMER ON: Press this button to initiate the auto-on time sequence. Each press will
increase the auto-timed setting in 30 minutes increments. When the setting time
displays 10.0, peach press will increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program, simply adjust the auto-on time to
0,0.
10. TIMER OFF: Press this button to initiate the auto-off time sequence. Each press will
increase the auto-timed setting in 30 minutes increments. When the setting time
displays 10.0, peach press will increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program, simply adjust the auto-off time to
0,0..
11. SWING: Used to stop or start vertical or horizontal louver movement or set the
desired up/down air flow direction.
12. FOLLOW ME: Push this button to initiate the Follow Me feature, the remote display
is actual temperature at its location. The remote control will send this signal to the
air conditioner every 3 minutes interval until press the Follow Me button again. The
air conditioner will cancel the Follow Me feature automatically if it doesn0t receive
the signal during any 7 minutes interval.
13. LED: Disable/Active indoor screen Display. When pushing the button, the indoor
screen display is cleared. Press it again to light the display.
14