Orbegozo FDI 94 Manual De Instalación página 58

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FDI 94 FDI 124 FDI 184 FDI 244 MANUAL DE INSTALACIÓN
The following is a list of different outdoor unit sizes and the distance between their mounting feet.
Prepare the installation base of the unit according to the dimensions below.
Model
FDI 94
FDI 124
FDI 184
FDI 244
 If you will install the unit on the ground or on a concrete mounting platform, do the following:
 Mark the positions for four expansion bolts based on dimensions in the Unit Mounting
 Dimensions chart.
 Pre-drill holes for expansion bolts.
 Clean concrete dust away from holes.
 Place a nut on the end of each expansion bolt.
 Hammer expansion bolts into the pre-drilled holes.
 Remove the nuts from expansion bolts, and place outdoor unit on bolts.
 Put washer on each expansion bolt, then replace the nuts.
 Using a wrench, tighten each nut until snug.
WARNING WHEN DRILLINGINTO CONCRETE, EYE PROTECTION IS RECOMMENDED AT ALL TIMES.
 If you will install the unit on a wall-mounted bracket, do the following:
CAUTION Before installing a wall-mounted unit, make sure that the wall is made of solid brick, concrete, or of
similarly strong material. The wall must be able to support at least four times the weight of the unit.
 Mark the position of bracket holes based on dimensions in
the Unit Mounting Dimensions chart.
 Pre-drill the holes for the expansion bolts.
 Clean dust and debris away from holes.
 Place a washer and nut on the end of each expansion bolt.
 Thread expansion bolts through holes in mounting brackets,
put mounting brackets in position, and hammer expansion
bolts into the wall.
 Check that the mounting brackets are level.
 Carefully lift unit and place its mounting feet on brackets.
 Bolt the unit firmly to the brackets.
TO REDUCE VIBRATIONS OF WALLMOUNTED UNIT If allowed, you can install the wall-mounted unit with
rubber gaskets to reduce vibrations and noise.
Dimensions outdoor unit
(Width x height x depth)
700x550x300
700x550x300
800x554x333
845x363x702
Mounting dimensions
A (mm)
B (mm)
487
298
487
298
514
340
540
350
Picture with explanatory purpose
Not included
58

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fdi 124Fdr 184Fdi 244

Tabla de contenido