Orbegozo FDI 94 Manual De Instalación página 92

FDI 94 FDI 124 FDI 184 FDI 244 MANUAL DE USUARIO
GETTING AN OPTIMAL PERFORMANCE
Getting an optimum performance in the cooling, heating or drying modes is possible in the following range of
temperatures. Using the device out of this range will activate some safety functions which will cause a less optimal
performance.
Temperature
Room temperature
Outside temperature
To obtain even a better performance of your device, please follow the next instructions:

Keep doors and windows closed.

Save energy by using the timer functions.

Do not block air inlets/outlets

Check and clean the filters regularly.
For detailed explanation of each function, refer to the Remote Control Manual
CONTROLLING THE AIR FLOW

Adjust the air flow direction properly otherwise, it might cause discomfort or cause uneven room
temperatures.

Adjust the horizontal louver using the remote controller.

Adjust the vertical louver manually.
To set the vertical air flow (Up-Down) direction
Perform this function while the unit is in operation with the button SWING/DIRECT.

Press the button to make the horizontal louver move at a range of 6ºC in each press.

For an automatic swing up and down press the button during three seconds. Press again to stop this
function.
To set the horizontal air flow direction (left - right)

Move the vertical louver manually (shown in the picture) to adjust the air flow in the direction you prefer.
IMPORTANT: Before adjusting the vertical louvers, the supply power must be disconnected.
Cooling
17⁰C - 32⁰C
0⁰C - 50⁰C
-15⁰C - 50⁰C
(for models with low
temperature cooling
system)
Heating Dehumidifying
0⁰C - 30⁰C
-15⁰C - 30⁰C
10⁰C - 32⁰C
0⁰C - 50⁰C
20