Care And Maintenance - Orbegozo FDI 94 Manual De Instalación

FDI 94 FDI 124 FDI 184 FDI 244 MANUAL DE USUARIO
MANUAL OPERATION (WITHOUT REMOTE CONTROL)
How to operate your unit without the remote control
In the event that your remote control fails to work, your unit can be operated manually with the MANUAL CONTROL
button located on the indoor unit. Note that manual operation is not a long-term solution, and that operating the
unit with your remote control is strongly recommended.
BEFORE MANUAL OPERATION - Unit must be turned off before manual operation.
To operate your unit manually:
1. Open the front panel of the indoor unit.
2. Locate the MANUAL CONTROL button on the right-hand side of the unit.
3. Press the MANUAL CONTROL button one time to activate FORCED AUTO mode.
4. Press the MANUAL CONTROL again to activate FORCED COOLING mode.
5. Press the MANUAL CONTROL button a third time to turn the unit off.
6. Close the front panel.
Warning: the manual button is intended for testing purposes and emergency operation only. Please do not use this
function unless the remote is lost and it is absolutely necessary. To restore regular operation, use the remote control
to activate the unit.

CARE AND MAINTENANCE

Cleaning of grille, case and remote control
Turn off the unit before cleaning the unit. To do it, use a soft and dry cloth. Do not use bleach, domestic drain
cleaners or corrosive products.
WARNING: Always turn off your air conditioner system and disconnect its power supply before cleaning or
maintenance.
22