Safety - Kenwood CCL45 Instrucciones

safety

Read these instructions carefully and retain for future
l
reference.
Remove all packaging and any labels.
l
If the cord is damaged it must, for safety reasons, be
l
replaced by KENWOOD or an authorised KENWOOD repairer.
For correct operation ensure that the bowl base is clean and
l
dry before fitting to the power unit.
Always switch off and unplug before:
l
assembling or disassembling;

when not in use;

before cleaning.

Always remove the stir tool and whisk before pouring
l
content from the bowl to avoid burning from splashing hot
ingredients.
The blades have been designed to be retained on the drive
l
shaft and should only be removed once the content has been
removed from the bowl. The blades are sharp, handle with
care.
Keep hands and utensils out of the bowl whilst connected to
l
the power supply.
When leaving the appliance unattended in the cooking mode
l
pay close attention to the following:
ensure the instructions are followed with regards to

temperatures and maximum quantities to process;
make sure the unit and cord are positioned out of reach of

children and away from the edge of the work surface;
check the progress on a regular basis to ensure enough

liquid is added and food is not overcooking.
Take care when lifting this appliance as it is heavy. Ensure the
l
bowl is empty and outlet cover is secure before moving. Do
not lift by the bowl handles.
Do not move the unit whilst in operation or still hot.
l
Never use a damaged appliance or attachment. Get it
l
checked or repaired: see "service and customer care".
3