Turning On The Unit; Selecting An Input Source; Music Setting - Teac NS-X1 El Manual Del Propietario

Turning on the unit

Press the STANDBY/ON (¤) button on the unit or on the remote
control to turn the unit on.
The unit turns on with the input source that was last selected.
It takes about 30 seconds to turn the unit on.
o
Note
Make sure power is connected to the unit. (See "Connecting the
power" on page 10 for detailed information.)

Selecting an input source

Press the FUNCTION button on the unit or on the remote control.
Each time the FUNCTION button is pressed, the input source
o
changes as follows:
iPod w Net Radio w MUSIC SERVER w FM w AUX
If you press the FUNCTION button to change the input source, the
o
currently selected input source will stop playing.
12

Music Setting

Selecting an input source from the Home menu
1
Press and hold the MENU (8) button on the unit or press
the Home button on the remote control to go to the
Home menu.
2
Press the PREVIOUS (.) or NEXT ( / ) button on the
unit or UP (5) or DOWN (b) button on the remote control
to move ">" on the display to the input source you want
to use.
"Bookmark", "iPod", "Net Radio", "MUSIC SERVER", "FM", "AUX",
o
and "Settings" will be listed on the top menu screen.
3
To select the input source next to ">", press the ENTER
(7/9) button on the unit or ENTER button on the remote
control.
As the input source, select "iPod", "Net Radio", "MUSIC SERVER",
o
"FM" or "AUX".
> B o o k m a
r k
i P o d
N e t R a d i o